NM Engineering | SKU:
NM.648846.2
NM Engineering Power Module NM.648846.2
¥82,500
Unit price
/
Unavailable
Tax included
The NM Engineering Power Module is a device newly designed and developed by NM Engineering R&D to improve engine output. It increases boost pressure by changing the charge pressure reading without changing the DME program. Boost pressure control increases in a gentle progressive manner, maintaining natural torque characteristics without discomfort and increasing engine torque by approximately 50Nm across the entire range. In addition, engine output can be increased by up to 45PS. Boost pressure, ignition timing, and air-fuel ratio corrections are adjusted to appropriate values using feedback from the ECU's closed loop control, so installing the power module will not have any adverse effects on the engine or drive system.
[Characteristics of power modules and effects of installation]
○ The way you use your car will not change at all after installation.
○ After installation, no fault codes will be entered into the engine or drive system DME.
○ Even with the DME installed, you can receive DME service updates at an authorized dealer.
In addition, this unit will not be affected by DME service updates.
○ It will not be recorded in the logs of authorized dealers' diagnostic equipment, so it will not affect the manufacturer's new car warranty.
Does not affect idle or cruise control.
○ The measured value of the map sensor vacuum area when the throttle valve is fully closed is the original value.
[Precautions when installing the power module]
○ The power module is designed specifically for each engine model, so it cannot be used with engines other than those for which it is compatible.
○ Cannot be used on vehicles that have other manufacturers' ECU tuning programs installed.
○ Cannot be used in conjunction with modules or throttle controllers from other manufacturers.
○ Please use the genuine air intake or NM Engineering high flow intake kit.
[About the changeover switch]
Remove the grommet on the back to reveal the switch.
This switching function can be changed depending on the type of gasoline.
○ When using standard Japanese high-octane gasoline, use the "PREMIUM/SUPER FUEL" side (lower side).
○ The upper "RACE FUEL/100+OCTANE" side cannot be used with anything other than special gasoline used exclusively for racing.
Improper use may result in engine damage.
□ Premium/Super Fuel side boost pressure increase reference value: approx. 0.2 bar
□ RACE FUEL/100+OCTANE side boost pressure increase reference value: approx. 0.35 bar
[Product Warranty]
The product warranty period for this product is one year from the date of purchase. The warranty is limited to installation on compatible vehicles and only malfunctions of this product are covered by the product warranty. Please note that any malfunctions or defects that occur in the engine, transmission, or other electrical systems after installation of this product are not covered by the warranty.
[Characteristics of power modules and effects of installation]
○ The way you use your car will not change at all after installation.
○ After installation, no fault codes will be entered into the engine or drive system DME.
○ Even with the DME installed, you can receive DME service updates at an authorized dealer.
In addition, this unit will not be affected by DME service updates.
○ It will not be recorded in the logs of authorized dealers' diagnostic equipment, so it will not affect the manufacturer's new car warranty.
Does not affect idle or cruise control.
○ The measured value of the map sensor vacuum area when the throttle valve is fully closed is the original value.
[Precautions when installing the power module]
○ The power module is designed specifically for each engine model, so it cannot be used with engines other than those for which it is compatible.
○ Cannot be used on vehicles that have other manufacturers' ECU tuning programs installed.
○ Cannot be used in conjunction with modules or throttle controllers from other manufacturers.
○ Please use the genuine air intake or NM Engineering high flow intake kit.
[About the changeover switch]
Remove the grommet on the back to reveal the switch.
This switching function can be changed depending on the type of gasoline.
○ When using standard Japanese high-octane gasoline, use the "PREMIUM/SUPER FUEL" side (lower side).
○ The upper "RACE FUEL/100+OCTANE" side cannot be used with anything other than special gasoline used exclusively for racing.
Improper use may result in engine damage.
□ Premium/Super Fuel side boost pressure increase reference value: approx. 0.2 bar
□ RACE FUEL/100+OCTANE side boost pressure increase reference value: approx. 0.35 bar
[Product Warranty]
The product warranty period for this product is one year from the date of purchase. The warranty is limited to installation on compatible vehicles and only malfunctions of this product are covered by the product warranty. Please note that any malfunctions or defects that occur in the engine, transmission, or other electrical systems after installation of this product are not covered by the warranty.
NM Engineering Power Module NM.648846.2 is backordered and will ship as soon as it is back in stock.
[Characteristics of power modules and effects of installation]
○ The way you use your car will not change at all after installation.
○ After installation, no fault codes will be entered into the engine or drive system DME.
○ Even with the DME installed, you can receive DME service updates at an authorized dealer.
In addition, this unit will not be affected by DME service updates.
○ It will not be recorded in the logs of authorized dealers' diagnostic equipment, so it will not affect the manufacturer's new car warranty.
Does not affect idle or cruise control.
○ The measured value of the map sensor vacuum area when the throttle valve is fully closed is the original value.
○ After installation, no fault codes will be entered into the engine or drive system DME.
○ Even with the DME installed, you can receive DME service updates at an authorized dealer.
In addition, this unit will not be affected by DME service updates.
○ It will not be recorded in the logs of authorized dealers' diagnostic equipment, so it will not affect the manufacturer's new car warranty.
Does not affect idle or cruise control.
○ The measured value of the map sensor vacuum area when the throttle valve is fully closed is the original value.
[Precautions when installing the power module]
○ The power module is designed specifically for each engine model, so it cannot be used with engines other than those for which it is compatible.
○ Cannot be used on vehicles that have other manufacturers' ECU tuning programs installed.
○ Cannot be used in conjunction with modules or throttle controllers from other manufacturers.
○ Please use the genuine air intake or NM Engineering high flow intake kit.
○ Cannot be used on vehicles that have other manufacturers' ECU tuning programs installed.
○ Cannot be used in conjunction with modules or throttle controllers from other manufacturers.
○ Please use the genuine air intake or NM Engineering high flow intake kit.
[About the changeover switch]
Remove the grommet on the back to reveal the switch.
This switching function can be changed depending on the type of gasoline.
○ When using standard Japanese high-octane gasoline, use the "PREMIUM/SUPER FUEL" side (lower side).
○ The upper "RACE FUEL/100+OCTANE" side cannot be used with anything other than special gasoline used exclusively for racing.
Improper use may result in engine damage.
This switching function can be changed depending on the type of gasoline.
○ When using standard Japanese high-octane gasoline, use the "PREMIUM/SUPER FUEL" side (lower side).
○ The upper "RACE FUEL/100+OCTANE" side cannot be used with anything other than special gasoline used exclusively for racing.
Improper use may result in engine damage.
□ Premium/Super Fuel side boost pressure increase reference value: approx. 0.2 bar
□ RACE FUEL/100+OCTANE side boost pressure increase reference value: approx. 0.35 bar
[Product Warranty]
The product warranty period for this product is one year from the date of purchase. The warranty is limited to installation on compatible vehicles and only malfunctions of this product are covered by the product warranty. Please note that any malfunctions or defects that occur in the engine, transmission, or other electrical systems after installation of this product are not covered by the warranty.
Car model |
Model | Year | Model | Standard Output | Configuration Output |
F54 / F55 / F56 / F57 | Cooper S | 2014- | ALL | 192PS | 235PS |
F54 / F56 / F57 / F60 | J.C.W. | 2015- | ALL | 231PS | 276PS |
F54 / F55 / F56 / F57 | Cooper S LCI | 2020- | ALL | 192PS | 235PS |
F54 / F56 / F57 / F60 | JCW LCI | 2020- | ALL | 231PS | 276 PS |
*Does not fit F56 GP3 / F54 / F60 JCW LCI 306PS specifications. |
MAKE | MODEL | ENGINE | YEAR | ENGINE MODEL |
---|---|---|---|---|
MINI |
F55 | Cooper S | 2014.10- | XS20 |
MINI | F55 | Cooper S (LCI) | 2018.05- | XU20M |
MINI | F55 | Cooper S (LCI2) | 2021.05- | XU20MW |
MINI | F56 | Cooper S | 2014.10- | XM20 |
MINI | F56 | Cooper S (LCI) | 2018.05- | XR20M |
MINI | F56 | Cooper S (LCI) | 2020.10- | XR20MW |
MINI | F56 | Cooper S (LCI2) | 2021.05- | XR20MW |
MINI | F56 | John Cooper Works | 2015.03- | XMJCW |
MINI | F56 | John Cooper Works | 2018.01- | XRJCW |
MINI | F56 | John Cooper Works (LCI) | 2018.05- | XRJCWM |
MINI | F56 | John Cooper Works (LCI) | 2020.07- | XRJCWMW |
MINI | F56 | John Cooper Works (LCI2) | 2021.05- | XRJCWMW |
MINI | F56 | John Cooper Works GP Inspired Edition | 2021.01- | XRJCWMW |
MINI | F57 | Cooper S | 2014.10- | WG20 |
MINI | F57 | Cooper S (LCI) | 2018.05- | WJ20M |
MINI | F57 | Cooper S (LCI) | 2021- | WJ20MW |
MINI | F57 | Cooper S (LCI2) | 2021.05- | WJ20MW |
MINI | F57 | John Cooper Works | 2015.06- | WHJCW |
MINI | F57 | John Cooper Works (LCI) | 2018.05- | WJJCWM |
MINI | F57 | John Cooper Works (LCI) | 2020.07- | WJJCWMW |
MINI | F57 | John Cooper Works (LCI2) | 2021.05- | WJJCWMW |
MINI | F54 | Cooper S | 2015.10- | LN20 |
MINI | F54 | Cooper S (LCI) | 2019.10- | LV20M |
MINI | F54 | Cooper S ALL4 (LCI) | 2019.10- | LV20M |
MINI | F54 | John Cooper Works | 2017.04- | LVJCW |
MINI | F60 | John Cooper Works | 2017.05- | YS20 |
MINI | F60 | John Cooper Works | 2019.10- | YZ20 |